5164
EASYLIFT 100L lift station - 1 clear water/wastewater pump - made of PE

This station is used to raise domestic water (washbasins, showers, sinks) outside the WC, water after treatment of an all-water pit, rainwater and stormwater runoff.

Domestic lifting gear consisting of: 
1 cylindrical polyethylene (PE) tank, volume 100 litres
1 screw-on PE cover resting on an O-ring
1 input Ø 100 female
1 cable gland
1 PVC check valve with F/F flap Ø 40 mm 
1 outlet outlet PVC Ø 40 mm Ø
1 pump with built-in float switch with 10 ml of cable, solid body passage max. 35 mm.
1 ventilation Ø50 
1 package consisting of 1 cuff, 1 gasket and 1 bell saw to make an additional entry according to the 5 center pieces available and a plug to block the horizontal entry if a vertical entry is made.

This station is used to raise domestic water (washbasins, showers, sinks) outside the WC, water after treatment of an all-water pit, rainwater and stormwater runoff.
Operation is automatic after connection.
The tank receives the water to be pumped back. It fills up, the float switch gives the pump start pulse, the water level goes down and when the tank is almost empty, the float gives the pump stop pulse, and so on.

N. B: inform users to prohibit wipes from being disposed of in the waste water network connected to the station.
Refer to the PRELPE manual before handling and installation of the lifting station.
The pump is ready to be connected to a 220 Mono + Earth socket. 
It must be protected upstream by a 30 mA differential switch.
Periodically check that the pump orifice is not partially blocked. 
Clean the tank periodically. 
Clean the float switch monthly.

A maintenance contract of at least 2 visits per year with a specialized company must be signed as soon as the equipment is put into service.
The pump is guaranteed for 1 year from the date of invoice.
The warranty is subject to installation and maintenance conditions.

Options

  Description
RH502 -
AE1612 ALARME DE NIVEAU HAUT SONORE 230V AV FLOTTEUR 10ML CABLE