5170
RELBIONUT - lifting station to be placed upstream of a compact die (1 pump)

Lifting for domestic use:
- 1 cylindrical tank Ø 438 mm inside polyethylene (PE)
- 1 bottom of tank resistant to the water table.
- 1 PE screw cap
- 1 porthole seal Ø 100 and its hole saw
- 1 cable run Ø 50 ext
- 1 discharge pipe in PVC pressure Ø 40 with elbow and union
- 1 non-return flap valve.
- 1 male outlet Ø 40 ext
- 1 pump with integrated float switch and 10 ml of cable, solid body passage of 35 mm maximum
PDF Technical sheet
This station is used for the recovery of runoff water (rainwater or infiltration), greywater (sewage from sinks, showers except WC water) and pre-treated water at the outlet of all-water pits. wastewater treatment plants, a ZEOMOP, a BIONUT or at the outlet of a sand filter.
The operation is automatic after connection.
The tank receives the water to be discharged. It fills up, the float switch gives the start-up pulse of the pump, the water level goes down and when the tank is almost empty, the float gives the stop impulse of the pump, and so right now.
See the PRELPE installation instructions before handling and installing the lifting station.
To make the inlet connection, drill the bowl with the hole saw and use the port seal to seal with the Ø 100 tube.
The pump is ready to be connected to a 220 Mono + Ground socket. It must be protected upstream by a 30 mA differential switch.
If the pump cable needs to be extended use a watertight connection AE141.
Periodically check that the pump port is not partially obstructed.
Clean the bowl periodically. Clean the float switch every month.
A maintenance contract of a minimum of 2 visits per year with a specialized company must be taken out as soon as it is put into service.
La pompe est garantie 1 an à compter de la date de facturation.
La garantie est subordonnée aux conditions de pose et d’entretien.

Options

  Description
RH502 -
AE141 KIT CONNECTEURS M/F POUR CABLE 3 POLES Ø 6 à 10mm
AE1613 ALARME SONORE DE NIVEAU HAUT 230V AVEC FLOTTEUR + 10ML CABLE