A connecting box is a residential peripheral product used for a better transit of the effluent in accordance with standard XP P 16-603. It also facilitates the maintenance of the pipes and effluent samples. Our connecting boxes resist surface run-off and parasite waters and are insensitive to H2S.
REP2/04/04
This polypropylene repartition box is composed by :
- a height body 420 mm with a flat bottom. It allows a homogeneous distribution of the effluent towards the 6 exits.
- a screw-dawn cover Ø 220
- 6 entries Ø 100 and 1 exit Ø 100 to emerge (perforation ensured by stamping the hammer).
REC2/02/13
This collecting box used at the exit of a sand filter is composed by :
- a polyethylene height body 1300 mm
- a screw-dawn cover Ø 220
- 6 entries Ø 100 and 1 exit Ø 100 to emerge (perforation ensured by stamping the hammer).
RH2/03/15
This polypropylene screw-dawn extension shaft is composed by :
- a 0.15m height body
- a thread at the top
- a bottom thread
RH2/02/30
This polyethylene screw-dawn extension shaft is composed by :
- a 0.30m height body
- a thread at the top
- a bottom thread
6060
Connecting boxes
Concerning the repartition boxes : the effluent reaches one inlet and is then distributed to one or more outlets. These outlets are 6 maximum in accordance with standard XP P 16-603 (ex-DTU 64-1).
Concerning the collecting boxes : the effluent reaches the inlets which would been connected. The effluent is then discharged to the outfall passing by the outlet which would been connected.
Concerning the collecting boxes : the effluent reaches the inlets which would been connected. The effluent is then discharged to the outfall passing by the outlet which would been connected.
Bore the holes of inlets and outlets of connection boxes by unblocking the covers thanks to a wedge of wood and a hammer.
Position the connection boxes on a level.
Backfill with sand.
Reminder : Positioning perfectly the devices on a level is essential to ensure a homogeneous distribution of the effluent.
The covers should be level with the finished ground thanks to the extension shafts Ref RH2/03/15 or RH2/02/30.
The screw-dawn cover must always remain accessible.
Position the connection boxes on a level.
Backfill with sand.
Reminder : Positioning perfectly the devices on a level is essential to ensure a homogeneous distribution of the effluent.
The covers should be level with the finished ground thanks to the extension shafts Ref RH2/03/15 or RH2/02/30.
The screw-dawn cover must always remain accessible.
A connection box requires no specific maintenance.