6605
GRP sludge traps from 5 to 12m3

An independent sludge separator is a device designed to separate and store heavy materials (sand, gravel, sludge, etc.) contained in raw water before they pass through a grease separator or hydrocarbon separator.

When placed upstream of a grease separator, it can also be used to lower the temperature of water collected from kitchens.
Upstream of pre-treatment plants to recover heavy materials contained in the collected water.
Refer to the PHPRV-NC installation instructions before handling and installing the sludge trap.

Make the Ø 100 ventilation (piking at the manhole opening) allowing the exhaust of gases as high as possible above the ridge. It will be topped with a device to prevent the passage of insects and small animals.
Remote extraction DN80 is possible by ordering option OD3/1924

The installer must supply and install a pressure PVC suction pipe to be connected to the outlet of the appliance and must place the firefighter's fitting supplied with the option at the curb.
The cleaning company must drain the appliance regularly when the amount of sludge collected reaches 50% of the appliance volume.
After each emptying, it is imperative to fill the sludge trap completely with cold water.