6658
PRV oil separator with stripper, without bypass, from 35 to 50l/s, with extension primers - 5mg/l
This oil separator without by-pass with a silt storage are perfect to treating water form covered car parks, petrol station, garages. For washing areas, provide a complementary V200 silt storage to obtain a volume of V 300.
Reminder : the oil level alarm, additional piece of equipment, is mandatory.
The operation of the hydrocarbon separator is based on the difference-in-density separation of insoluble liquids (0.85 density) contained in the runoff water.
The dewatering compartment allows the settling and trapping of suspended solids> 200 μm.
The coalescence system, thanks to its large surface area, allows to concentrate the free hydrocarbons by promoting their collision. The hydrocarbons then rise to the surface.
The automatic shutter (float) avoids any risk of release of hydrocarbons.
- Design complies with WITH NF EN 858-1 and NF EN 858-2 standards
- 20 year warranty tank against corrosion
- Hold in salt medium
- Phenomic tabletheating until tank height (beyond us consult)
- Low weight
- Easy handling
- Coalescence removable and facilitating maintenance
Refer to the PHPRV-NC manual before handling and installing the separator.
An annual inspection visit must be performed to verify the operation of the unit.
It is recommended that the unit be drained when the sludge reaches 50% of the sludge's working volume or that the hydrocarbons occupy 80% of the separator's holding capacity (see NF P16-442).
After each emptying, the apparatus must be re-watered and the flotation of the shutter must be checked.
General maintenance instructions E114 available on our website.