UP

Oil separator

Runoff water, as it travels over impermeable surfaces, becomes loaded with pollutants such as hydrocarbons and suspended solids. A hydrocarbon separator fitted with a sludge separator enables sites such as car washes, petrol stations and parking lots to treat and decontaminate their water. These sites are obliged to install a CE-compliant hydrocarbon separator.

Water loaded with hydrocarbons and suspended solids arrives in the silt storage compartment, where the heavy suspended solids settle and form sludge, which must be cleaned regularly. Next, the water flows through a coalescing filter system that allows the hydrocarbon molecules to agglomerate and separate from the water (by density difference). The hydrocarbons thus form a layer on the surface of the separator compartment. This layer of hydrocarbons must be emptied more or less regularly, depending on the activity of the site to be treated.

oil separator

Our Products

[4730] Hydrocarbon separator NF steel 5mg/L, 1.5 to 6 L/s, V100 sludge trap, top: circular primers - Main image
4730

Hydrocarbon separator NF steel 5mg/L, 1.5 to 6 L/s, V100 sludge trap, top: circular primers

 
[4731] Hydrocarbon separator NF steel 5mg/L, 1.5 to 6 L/s, V100 silt storage, top: unenclosed - Main image
4731

Hydrocarbon separator NF steel 5mg/L, 1.5 to 6 L/s, V100 silt storage, top: unenclosed

 
[4732] Hydrocarbon separator NF steel 5mg/L, 1.5 to 6 L/s, with bypass, V100 sludge trap, top: circular primers - Main image
4732

Hydrocarbon separator NF steel 5mg/L, 1.5 to 6 L/s, with bypass, V100 sludge trap, top: circular primers

 
[4733] Hydrocarbon separator NF steel 5mg/L, 1.5 to 6 L/s, with bypass, V100 sludge trap, top: without closure - Main image
4733

Hydrocarbon separator NF steel 5mg/L, 1.5 to 6 L/s, with bypass, V100 sludge trap, top: without closure

 
[6645] CE polyethylene hydrocarbon separator 5mg/L, 1.5 to 15L/s, V100 sludge trap - Main image
6645

CE polyethylene hydrocarbon separator 5mg/L, 1.5 to 15L/s, V100 sludge trap

 
[6647] CE polyethylene hydrocarbon separator 5mg/L, 20 to 30L/s, V100 sludge trap - Main image
6647

CE polyethylene hydrocarbon separator 5mg/L, 20 to 30L/s, V100 sludge trap

 
[6648] CE polyethylene hydrocarbon separator 5mg/L, 20 to 30L/s, with bypass, V100 sludge trap - Main image
6648

CE polyethylene hydrocarbon separator 5mg/L, 20 to 30L/s, with bypass, V100 sludge trap

 
[6649] CE polyethylene hydrocarbon separator 5 mg/L, 3 to 15 L/s , with bypass, V100 sludge trap - Main image
6649

CE polyethylene hydrocarbon separator 5 mg/L, 3 to 15 L/s , with bypass, V100 sludge trap

 
[6690] CE polyethylene hydrocarbon separator 5mg/L, 6 to 10L/s, with V300 sludge trap - Main image
6690

CE polyethylene hydrocarbon separator 5mg/L, 6 to 10L/s, with V300 sludge trap

 
[6669] CE polyester hydrocarbon separator, flow rate greater than 50 L/s, with by-pass, custom-made - Main image
6669

CE polyester hydrocarbon separator, flow rate greater than 50 L/s, with by-pass, custom-made

 
[6668] CE polyester hydrocarbon separator, flow rate over 50 L/s, made to measure - Main image
6668

CE polyester hydrocarbon separator, flow rate over 50 L/s, made to measure

 
[6659] CE polyester 5mg/L hydrocarbon separator, 35 to 50 L/s, with bypass - Main image
6659

CE polyester 5mg/L hydrocarbon separator, 35 to 50 L/s, with bypass

 
[6658] CE polyester 5mg/L hydrocarbon separator, 35 to 200 L/s, V100 sludge trap - Main image
6658

CE polyester 5mg/L hydrocarbon separator, 35 to 200 L/s, V100 sludge trap

 
[4798] CE steel hydrocarbon separators 5 mg/L, 1.5 to 50L/s, V100 sludge trap - Main image
4798

CE steel hydrocarbon separators 5 mg/L, 1.5 to 50L/s, V100 sludge trap

 
[4799] CE steel hydrocarbon separators 5 mg/L, 3 to 50L/s, with bypass, V100 sludge trap - Main image
4799

CE steel hydrocarbon separators 5 mg/L, 3 to 50L/s, with bypass, V100 sludge trap

 
[4816] CE steel hydrocarbon separators 5 mg/L, 3 to 15L/s, V100 sludge trap and lift compartment (without pump) - Main image
4816

CE steel hydrocarbon separators 5 mg/L, 3 to 15L/s, V100 sludge trap and lift compartment (without pump)

 
[6670] Fario2 PRV hydro separator with downstream bypass - Main image
6670

Fario2 PRV hydro separator with downstream bypass

 
[4809] CE 5 mg/l hydrocarbon separators with V300 sludge trap without closure kit - Main image
4809

CE 5 mg/l hydrocarbon separators with V300 sludge trap without closure kit

 
[4808] CE ACIER 5 mg/l hydrocarbon separators with V300 sludge trap and circular primers - Main image
4808

CE ACIER 5 mg/l hydrocarbon separators with V300 sludge trap and circular primers

 
[6399] Chassis speed for cylindrical PA tank - Main image
6399

Chassis speed for cylindrical PA tank

 

A future collaboration, or a need for information.

Mon panier